Water Pump in the Wanderer.
Note the load Resistor. This is secured by a metal strap. Originally this was fitted to the pump base, which is metal. Should this strap chaff the resistor it will short circuit and possibly damage the pump. I have placed around the resistor some insulating material and relocated it off the metal plate. I have also built a box over the pump to ensure no weight is place on the fittings when we travel and items are placed in this position.
When checking the pump, check the pipe fittings from the pump, you will note my fittings are slightly removed from the white base input. That is a fault. As these are push fits, just pull out and push the pipe into the white base to correct it.